I-Aluminium Solar Panel Frame (33*25*18)

Uhlangothi Olude

I-aluminium solar panel ifreyimu ye-double glass glass solar panel

• Imodeli yefreyimu yelanga: 33*25

• Ubukhulu: 33mm ukuphakama

• Uhlobo: Uhlaka lwe-Aluminium lufakiwe

• Impahla eluhlaza: 6005 aluminium ingxubevange

• Usayizi wesigaba sozimele: 3 3*25 mm

• Usayizi wesikhala: 6.2mm

• I-MOQ: 500sets

• Umbala: isiliva

• Imigomo yokukhokha: TT noma L/C

• Imininingwane ejwayelekile: 2384 * 1303mm

---

Uhlangothi olufushane

I-aluminium solar panel ifreyimu ye-double glass glass solar panel

• Imodeli yefreyimu yelanga: 33*18

• Ubukhulu: 33mm ukuphakama

• Uhlobo: Uhlaka lwe-Aluminium lufakiwe

• Impahla eluhlaza: 6005 aluminium ingxubevange

• Usayizi wesigaba sohlaka: 33*18mm

• Usayizi wesikhala: 6.2mm

• I-MOQ: 500sets

• Umbala: isiliva

• Imigomo yokukhokha: TT noma L/C

• Imininingwane ejwayelekile: 2384 * 1303mm

  
  

  
  

---

Ubakaki

I-aluminium solar panel ifreyimu ye-double glass glass solar panel

• Imodeli yefreyimu yelanga: 40*40*11.9

• Ubukhulu: 40mm ukuphakama

• Uhlobo: Uhlaka lwe-Aluminium lufakiwe

• Impahla eluhlaza: 6005 aluminium ingxubevange

• Usayizi wesigaba sohlaka: 40*40*11.9mm

• I-MOQ: 500sets

• Umbala: isiliva

• Imigomo yokukhokha: TT noma L/C

• Imininingwane ejwayelekile: 2384 * 1303mm

---

Ukwakhiwa Kwekhemikhali kwe-Aluminium Alloy:

Ingxubevange	Si	Fe	Cu	UMn	Mg	Cr	Zn	Thi	Abanye	Al(Min)
6063	0.2-0.6	0.35	0.1	0.1	0.45-0.9	0.1	0.1	0.1	0.15	phumula
6005	0.6-0.9	0.35	0.1	0.1	0.4-0.6	0.1	0.1	0.1	0.15	phumula

Izakhiwo Zemishini Ye-Aluminium Alloy:

Ingxubevange	Ulaka	Ubukhulu	I-TS/ σ b (MPa)	YS/ σ 0.2 (MPa)	I-ELOG./ δ %	Ukuqina/HW
6063	T5	≥ 0.8	≥160	≥110	≥8	≥8
6063	T6	≥ 0.8	≥205	≥180	≥8	≥10
6005	T5	≥ 0.8	≥260	≥240	≥6	≥12
6005	T6	≥ 0.8	≥270	≥250	≥6	≥14

Bonke osayizi bephaneli yelanga njengoba ngezansi ukuze kubhekiswe kuzo:

Amandla (w)	Inombolo yamaseli(ama-pcs)	Usayizi wamaseli(mm)	yelanga (mm) Usayizi wozimele wephaneli	Isisindo (Kg)
5	2*18	78*12	280x190x17	0.7
10	4*9	52*31.2	250x350x17	1.2
20	4*9	78*39	420x360x17	2.3
30	2*18	156*26	360x550x20	2.5
40	4*9	156*39	670x 420x25	3.2
50-60	4*9	156*52	540x670x25	4.2
80-90	4*9	156*78	780x670x30	6.6
100	4*9	156*104	1000x670x30	8
110-120	4*18	156*52	1020x670x35	8.8
130	4*9	156*117	1120x670x35	10.5
140	4*9	156*63	1200x670x35	10.5
150-180	4*9	156.75*156.75	1480x670x35	12
190-200	6*12	125*125	1580x808x35	15.5
210-230	6*8	156.75*156.75	1320x992x35	17
250-270	6*9	156.75*156.75	1482x992x40	18
280-310	6*10	156.75*156.75	1640x992x40	18
340-380	6*12	156.75*156.75	1956x992x40	23
460-500	8*12	156.75*156.75	1956x1310x45	29

Isingeniso Sefekthri:

I-Jiangyin Zhonghao energy Technology Co., LTD yasungulwa ngo-2020, .Inkampani yethu ibambe iqhaza ngokuyinhloko ocwaningweni nasekuthuthukisweni, ekukhiqizeni nasekusetshenzisweni kwemikhiqizo yefreyimu yelanga, imigqa yokukhiqiza uhlaka oluzenzakalelayo, nezinto zokwakha zamandla aluhlaza. Imikhiqizo yayo eyinhloko ihlanganisa imikhiqizo yefreyimu ye-photovoltaic, imikhiqizo ye-photovoltaic ehlanganisiwe yesakhiwo (BIPV), kanye nezakhiwo zokusekela ze-photovoltaic. Imikhiqizo ye-Zhonghao Energy Technology Co., LTD yaziwa ngokungasindi kwayo, ukuzinza okuphezulu, ukumelana nesimo sezulu esihle kakhulu, nokumelana nokugqwala okuqinile, futhi isetshenziswa kabanzi emkhakheni we-photovoltaic.

I-Zhonghao Energy Technology izibophezele ekuhlangabezaneni nezidingo zokuthuthukiswa kwemakethe yamandla elanga e-China, icwaninga ngenkuthalo imikhiqizo emisha futhi ithuthukise ngokuqhubekayo ubuchwepheshe obusha. . Le nkampani isungule ubudlelwano bokubambisana besikhathi eside nobuzinzile nabakhiqizi abambalwa abahamba phambili, ngokuqhubekayo ithuthukisa ukuncintisana kwayo okuyisisekelo kanye nesabelo semakethe. Imikhiqizo yayo isiphumelele izitifiketi eziningi zamazwe ngamazwe, okuhlanganisa i-ISO 9001:2015 Quality Management System kanye nezitifiketi ze-ISO 14001:2015 ze-Environmental Management System. Imikhiqizo idumile ngaphakathi nangaphandle, kanti u-70% uthengiswa ezimakethe ezisezingeni eliphezulu eMpumalanga Ephakathi, Japan, South Korea, Singapore, India, Vietnam naseThailand.

I-Corporate Visio:          Iba yibhizinisi elihle

I-Corporate Mission: Thuthukisa amandla elanga ukuze kuzuze sonke isintu -

Umoya Webhizinisi:   Ubuqotho, Ubulula, Inhlonipho, Ukubonga

Inkolelo Yebhizinisi:   Yiba ngumuntu oqotho futhi usebenze ngobuqotho

---

Isitifiketi Sefekthri:

---

Inqubo yokukhiqiza:

Uhlaka lwephaneli yelanga luyisakhiwo esiyisihluthulelo sokusekela semojula ye-photovoltaic. Ikakhulukazi yenziwe nge-aluminium alloy materials futhi inezici zesisindo sokukhanya, ukumelana nokugqwala namandla aphezulu. Inqubo yokukhiqiza ingahlukaniswa ngezixhumanisi eziyinhloko ezilandelayo:

1. Ukulungiswa kwempahla eluhlaza kanye  nokukhishwa kwephrofayili

Ukukhetha ingxubevange ye-Aluminium :  Okuvame ukusetshenziswa okungu-6063-T5 noma okungu-6061-T6 ama-alloys e-aluminium kumele kuhlangabezane nezimfuneko zamandla aqinile (≥160MPa) nokwelulwa (≥8%).

Ukubumba kwe-Extrusion ‌:  I-aluminium rod ishiselwa ku-450-500℃ ngokusebenzisa isikhunta bese idluliselwa kuphrofayela enomumo othize we-cross-sectional, kulandelwa ukucisha okupholisa umoya ukuze kwandiswe ubulukhuni.

2. Ukwelashwa kokushisa  nokuqinisa ukuguga

Ukwelashwa kokuguga ‌:  Iphrofayili enwetshiwe idinga ukugcinwa esithandweni sokuguga cishe esingaba ngu-200 ℃ amahora angu-4-6 ukuze kuvunyelwe izakhi zengxubevange ukuthi zishaye imvula ngokulinganayo futhi zithuthukise ngokuphawulekayo izici zemishini (ezifana nokwanda kokuqina ngamaphesenti angaphezu kuka-30%).

3. Ukwelashwa kwendawo (i-anodization  )

I-S andblasting pretreatment :  I-sandblasting isetshenziselwa ukususa ukungcola okungaphezulu futhi kwandise ukuhwalala ukuze kuthuthukiswe ukunamathela kongqimba lwe-oxide.

I-Anodizing:  Ugesi usetshenziswa ku-sulfuric acid electrolyte ukuze ukhiqize ifilimu ye-oxide engu-15-25μm ewugqinsi ukuze kuthuthukiswe ukumelana nokugqwala (ukuhlolwa kwesifutho sikasawoti kungafinyelela amahora angaphezu kuka-1000). I-oxidation emnyama noma eminye imibala ingakhethwa ukuze ihlangabezane nezidingo zobuhle.

4. Ukunemba kwemishini

Ukusika:  Sebenzisa isaha enekhanda eliphindwe kabili elingu-45° ukuze usike iphrofayela ibe ubude obudingekayo bengxenye, ngokulawula okunembayo ngaphakathi kuka-±0.5mm.

Ukubhoboza nokufaka:  Umshini wokubhoboza ozenzakalela ngokugcwele ucubungula izimbobo ezikhwezayo nezikhala (ezifana nesakhiwo sembobo esishiwo kulungelo lobunikazi lokunqwabelana kothuli).

5. Ukuhlangana nokulawulwa kwekhwalithi

Ukulungiswa kwamakhona:  Amakhona amane ohlaka axhunywe amakhona ensimbi engagqwali, futhi ukuhlola okuphindwe kathathu kusetshenziswa ukuze kuqinisekiswe ukuqina nokungangeni komoya.

Amazinga  okuhlolwa

6. Idizayini yokupakisha nokulwa nomonakalo

Ukuvikelwa kwefilimu:  Ifilimu yokuvikela ye-PE isetshenziswa phezulu ukuze kuvinjelwe imihuzuko ngesikhathi sokuthutha.

I-Interlayer winding:  Uhlaka ngalunye luhlukaniswa nge-interlayer yephepha ukuze kugwenywe ukulimala kokungqubuzana. Idizayini yokunqwabelana kothuli: Isibonelo, 'indawo yomhlahlandlela + yesikhala sekhadi' kulungelo lobunikazi le-Tongwei Solar lizuza ukuzihlanza ngokwalo ngokuthuthukisa ukuma kohlaka, ukunciphisa izindleko zokusebenza nezokulungisa.